FO1-BV1LT-3L(Lugged type Butterfly Valve–Handle Operation)
●Brief
The driving mode of LT type butterfly valve can be manual, worm gear, pneumatic and electric; the connection mode can be flange and clamp; the structural form can be single eccentric, central line type, double eccentric and three eccentric; the sealing structure can be soft seal and hard seal.
●Features
1. The design is novel, reasonable, structure, light weight and quick opening and closing.
2. Small operating torque, convenient operation, labor saving and skillful.
3. It can be installed in any position and convenient.
APPLICATION
General Use: Water,sea water,gas, pressurized air, acids etc.
CARACTERISTIQUES GENERALES
Resilient Seat Lug Type Butterfly Valves
Design according with BS EN593/API609
Tightness in both ways.Lug type with threaded ears.
Flexible sleeve adapted to the shape of the body assures low operating torque.machined disc on periphery giving a low and regular torque.Unejectable stem. mounting flange according to ISO 5211.
CONSTRUCTION
| 1 | BODY | Cl/DI/ WCB / STAINLESS STEEL |
| 2 | SEAT | EPDM / NBR / PTFE / SILICON |
| 3 | DISC | DI / CF8 / CF8M / Al-Bc / DUPLEX STEEL |
| 4 | STEM | SS304/316/416 |
| 5 | BUSHING | PTFE / BRONZE |
| 6 | O-RING | NBR/EPDM |
| 7 | BUSHING | PTFE/BRONZE |
| 8 | BOLT | STAINLESS STEEL |
| 9 | PRESSURE RING | CARBON STEEL |
| 10 | BOLT | STAINLESS STEEL |
| 11 | FLAT WASHER | STAINLESS STEEL |
| 12 | PNEUMATIC ACUTATOR | |
| NO. | PARTS | MATERIAL |
STANDARDS
Manufacture according to the requirements of the European directive 2014/68/EU,modulate H Face to face according to standards NF EN558 SERIE 20.ISO5752,DIN3202.
Mounting between flanges UNI EN1092:PN10/16,ANSI150,JIS 5K/10K,BS 10 Table E.Etc.
Body:24bar
Seat:17.6bar
